26
Lap Belt Installation
• Place the infant car seat rear-
facing on the vehicle seat.
• Pull the vehicle belt out and
route it through the belt
guides.
• Verify that the vehicle belt is
not twisted and then buckle.
• Lock your vehicle seat belt
system as instructed by your
vehicle owner’s manual.
• Release the elastic loop on
the stroller adapter and lift
the cover to expose the belt
guides for installation.
Installing without Base
• Secure child in the infant car seat before installing car
seat in vehicle.
• There are many different kinds of vehicle lap belts.
Check your vehicles owner’s manual to determine what
kind of belt system is in your vehicle and how to lock it.
To Next Page
Loading...
