Britax Elite - Removing the Elite from the car

- 11 -
Finally, push the Elite onto the vehicle
seat using your body weight.
5
...and then pull the diagonal section of
the seat-belt tight here.
6
The Elite should now be secure. To
check, pull forward firmly on the
harness. There should be little or no
forward movement.
IMPORTANT - After installing
the Elite you need to check the
position of the seat-belt buckle.
(see Correct Buckle Position on
page 12).
If you are in any doubt contact
our Customer Service
Department on 01264 386034.
7
Removing the Elite from the car
Unfasten the seat-belt and unthread it
from your Elite.
IMPORTANT - Do not leave
your child seat loose. Always
fasten the seat-belt across the
Elite when it is not being used
by your child to prevent the
seat being thrown forward in
the event of an accident.