- 14 -
Looking after the Elite
Removing the cover
First undo the studs on the back of the
head support and remove it from your
Elite. Place the Elite on the floor. With
one hand on the front of the seat,
push the adjuster button down as you
pull the shoulder straps forward as
much as possible to loosen the harness
1
Unfasten the cover zip at the back of
your car seat and unhook the shoulder
straps from the yoke. Pull them
through to the front of the seat.
Unfasten the buckle and remove the
comfort pad.
2
Pull the harness straps through the
chest pads.
3
Undo top and bottom elastic ties.
Gently pull the cover off from the top
of the seat, easing the buckle, elastic
ties, chest pads and harness straps
through their slots.
4
To Next Page
Loading...
