- 7 -
Pull the shoulder strap out off the
chest pad. Then push the chest pad
through to the back of your car seat.
3
Select the required shoulder slot and
push the chest pad through to the
front of your car seat.
4
Re-thread the shoulder strap through
the chest pad and back through your
chosen shoulder slot in the cover and
seat. Make sure it is not twisted.
5
Hook the shoulder strap back on to
the yoke. Make sure the adjuster strap
is not twisted.
6
Pull the strap forward to remove any
slack. Make sure the harness is
threaded through the buckle tongues
as shown. Repeat from step 2 with the
other strap. Then zip the cover back
up and fasten the head support in
place.
7
To Next Page
Loading...
