18
STROLLER ASSEMBLY
ATTACHING THE STROLLER SEAT
ALWAYS REMOVE YOUR CHILD FROM THE STROLLER SEAT BEFORE
INSTALLING, REMOVING OR CHANGING THE SEAT DIRECTION.
PLEASE NOTE: The seat is reversible so it can be attached to the frame in
the forward facing position or the rearward facing position when used alone
in the upper position on the stroller frame.
A Press down on the lower section of the brake pedal to engage the brake.
Insert the seat connectors on the seat unit into the housings on the stroller
frame.
B Push down on the seat until a ‘click’ is heard which indicates the seat
connectors have locked into the housings. Pull up on both sides of the seat to
ensure that it is locked into place correctly.
IMPORTANT NOTE:
‘CLICK’
CAUTION
A
B
To Next Page
Loading...
