EasyManua.ls Logo

Britax Flexx - Adjusting the Harness

Britax Flexx
64 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
31
ADJUSTING THE HARNESS
A Tighten or loosen the shoulder straps and crotch strap by sliding the 3 bar
harness adjuster up or down. The crotch strap should be adjusted to a snug fit.
B Tighten or loosen the waist straps, hold and lift the 4 bar harness adjuster and
pull the harness strap to adjust to the desired fit. The waist strap needs to fit
firmly around the child.
CAUTION: DO NOT SLIDE 3 BAR SLIDER OVER THE
SEWN TAB ON SHOULDER HARNESS.
STROLLER OPERATION
SECURING YOUR CHILD IN THE HARNESS
B Hold the centre button in on the crotch buckle and insert the waist buckle
tongues into the crotch strap buckle until you hear a ‘click’.
C Repeat the procedure on the other side.
IMPORTANT: Pull on each waist buckle tongue to make sure they are
locked into the crotch buckle assembly. If not, repeat above procedure.

Table of Contents

Related product manuals