STROLLER ASSEMBLY
ATTACHING THE SHOULDER HARNESS PADS
IMPORTANT NOTE:
ENSURE THAT THE SHOULDER STRAPS ARE FITTED THROUGH THE
APPROPRIATE HARNESS SLOTS TO SUIT YOUR CHILD’S SEATED
SHOULDER HEIGHT.
A Release the harness buckles (Refer
to Page 32) and slide the shoulder
harness pads onto the shoulder
harness straps.
ATTACHING THE BOOT COVER
A Place the bottom of the boot cover
over the leg rest.
B Pull the top section of the boot cover
under the arm bar and the fold it over
the top of the arm bar.
C Connect the hidden magnets to
secure the boot cover in place.
24
To Next Page
Loading...
