ATTACHING THE BASSINET TO THE TANDEM AXLE
PLEASE REFER TO PAGE 7 FOR SMART LIFTING TECHNIQUES.
PLEASE NOTE: THE BASSINET CAN ONLY BE USED IN THE FORWARD-
FACING MODE (FACING TOWARDS THE FRONT OF THE STROLLER) WHEN
IN THE LOWER POSITION.
A Lower the bassinet and insert the
connectors into the housings on the
second seat axle and push down on
the bassinet until a ‘click’ is heard
which indicates the connectors have
locked into the housings. Gently pull
up on the bassinet canopy handle to
ensure it is locked into place.
CAUTION
BASSINET OPERATION
‘CLICK’
REMOVING THE BASSINET FROM THE TANDEM AXLE
A Lift the bassinet release lever located
at the bottom of the canopy and using
the handle, lift the bassinet up and
away from the axle.
IMPORTANT NOTES:
PLEASE REFER TO PAGE 7 FOR SMART LIFTING TECHNIQUES.
• ALWAYS REMOVE YOUR CHILD FROM THE BASSINET BEFORE
REMOVING THE BASSINET FROM THE TANDEM AXLE.
CAUTION
53
To Next Page
Loading...
