TANDEM PACK ASSEMBLY
B To remove the adaptors, press in and hold the button on the inside of the
adaptor and then pull each adaptor up and out of the frame sockets.
+10cm
A
B
45
IMPORTANT NOTE:
THE HEIGHT ADAPTORS ARE SUPPLIED WITH THE SECOND SEAT.
THE HEIGHT ADAPTORS ARE USED TO CREATE MORE SPACE BETWEEN
THE UPPER & LOWER POSITIONS (IF REQUIRED) OF THE STROLLER.
A Attach the height adapters to the stroller frame by lining up the connectors with
the frame sockets. Press down on the adaptors until you hear a ‘click’ which
indicates the adaptors have locked into the frame. Pull up on the height
adaptors to ensure they are locked into the frame sockets.
WARNING: DO NOT USE THE HEIGHT ADAPTORS
(SUPPLIED WITH THE SECOND SEAT) IN SINGLE STROLLER MODE.
INSTALLING AND REMOVING THE HEIGHT ADAPTORS
To Next Page
Loading...
