ASSEMBLING THE BASSINET
BASSINET ASSEMBLY
C Pull the frame supports outward by the straps until they lock under all 4 clips.
Push down lightly on the top edges of the carry cot to ensure that the frame
support rods are firmly locked in place.
D Place the mattress into the bassinet.
‘CLICK’
C D
ATTACHING THE BASSINET TO THE STROLLER FRAME
PLEASE REFER TO PAGE 7 FOR SMART LIFTING TECHNIQUES.
IMPORTANT NOTE:
ALWAYS REMOVE YOUR BABY FROM THE BASSINET BEFORE
ATTACHING OR REMOVING THE BASSINET.
PLEASE NOTE: The bassinet can only be used in rearward facing mode
in the upper position on the stroller frame. The stroller frame will not fold
with the bassinet attached. It must be removed before folding.
49
To Next Page
Loading...
