11
Re-threading the Buckle
IMPORTANT: Select the slot closest to, but not under the child.
Turn and push the buckle retainer
1
so that the short side will pass
through the slot in the cover and
child seat shell.
Pull through the slots in the cover
2
and child seat shell to the bottom
of the child seat.
Pull the buckle away from
3
the child seat until tight.
Verify that the buckle
retainer lies flat against
the child seat shell. Ensure
that the buckle strap is not
twisted and that the button
faces out.
NOTE: The belly pad must be pulled over the metal retainer to remove.
Child Seat features Overview
To Next Page
Loading...
