Britax FRONTIER - Harness Mode: LATCH Short Path Installation

22
LATCH – Short Path Only
Checklist for proper installation:
Does your vehicle:
Have a top tether anchor? 9
Always use the Versa-Tether *
for children weighing 65 – 80
lbs (29.5 – 36.3 kg). Britax
recommends that the Versa-
Tether be used at all times.
Have LATCH anchors? 9
Check your vehicle owner’s manual for the vehicle’s latch anchor limits. *
IMPORTANT: When using the LATCH connectors you must also use the
top tether. If LATCH anchors are not available, you must use vehicle belt
installation methods.
Rotate the recline block to harness
3
position.
Harness Mode
Remove the Versa-Tether from the 1
storage clip.
Loosen the tether and place over
2
the child seat back.
Place the child seat on the vehicle
4
seat.
LATCH short path
Harness Mode: Installing Your Child Seat