26
Harness Mode
Lap-Shoulder Belt – Short
Path
Checklist for proper installation
Does your vehicle:
Have a seat belt that can be locked? 9
Check your vehicle owner’s manual *
to determine what type of vehicle
belt you have and how it can be
locked for use with child seats.
Have a top tether anchor? 9
Always use the Versa-Tether for children weighing 65 – 80 lbs (29.5 – 36.3 kg). *
Britax recommends that the Versa-Tether be used at all times. Using the tether
will improve the stability of the child seat and reduce the risk of injury. Check
your vehicle owner’s manual for tether anchor locations.
If the vehicle has a tether anchor for 1
the chosen seating position, then
remove the Versa-Tether from the
storage clip.
Loosen the tether and place it up
2
and over the child seat back.
Rotate the recline block to harness
3
position.
Place the child seat on the vehicle
4
seat.
Lap-shoulder belt short path
Harness Mode: Installing Your Child Seat
To Next Page
Loading...
