EasyManua.ls Logo

Britax FRONTIER - Versa-Tether Crash Indicator; Energy-Absorbing Tether Function

Britax FRONTIER
60 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
54
Troubleshooting
Problem: The harness is hard to adjust.
Possible Solution: Check that the head restraint adjust and harness
adjust are properly aligned. Do not use the head restraint adjuster
when the harness is attached.
Possible Solution: The yoke may be caught on a strap or other
component of the child seat. Remove the obstruction and try adjusting
the harness again.
Problem: The buckle will not fasten with a click after each tongue is
inserted
Possible solution: There may be debris in the buckle mechanism.
Clean the buckle as shown on page 50 and 51 and try fastening the
buckle again.
Problem: The cup holder will not go back into the stowed position.
Possible solution: The base of the cup holder is not unlocked. Push it
up to unlock the cup holder and try stowing the cupholder.
If you have misplaced your head restraint lock-out screw, you can
purchase a replacement #8 x 1/2” sheetmetal screw at any hard-
ware store.
Please contact Consumer Services at 1.888.427.4829 if you have an
issue not listed here.

Other manuals for Britax FRONTIER

Related product manuals