30
If the vehicle has a tether anchor 1
for the chosen seating position,
then remove the Versa-Tether
from the storage clip.
Harness Mode
Lap Belt – Short Path Only
Checklist for proper installation
Does your vehicle:
Have a seat belt that can be locked? 9
Check your vehicle owner’s *
manual to determine what type
of vehicle belt you have and how
it can be locked for use with child
seats.
Have a top tether anchor? 9
Always use the Versa-Tether for children weighing 65 – 80 lbs (29.5 – 36.3 *
kg). Britax recommends that the Versa-Tether be used at all times. Using the tether
will improve the stability of the child seat and reduce the risk of injury. Check your
vehicle owner’s manual for tether anchor locations.
Loosen the tether and place it up 2
and over the child seat back.
Rotate the recline block to harness
3
position.
Place the child seat on the vehicle
4
seat.
Lap belt short path
Harness Mode: Installing Your Child Seat
To Next Page
Loading...
