34
Booster to Harness Mode
To replace the harness and buckle:
Locate the harness assembly.1
Ensure that harness slots in cover, 3
head restraint and harness adjuster
are aligned. Replace the screw to
lock the head restraint adjuster.
Pull on the buckle to ensure
5
the retainer lies flat against
the shell.
Ensure that the button *
faces out.
From the top of the child seat, turn 4
the metal retainer of the buckle strap
so it will slide through the slot.
Choose the slot that is closest *
to, but not under your child.
Move the head restraint to the 2
lowest position. Move the harness
adjuster to the highest position.
Harness Mode: Installing Your Child Seat
To Next Page
Loading...
