47
Replacing the Cover
Care and Maintenance
Move the head restraint to the 1
highest position.
Remove the screw to unlock the *
head restraint adjuster. Store the
screw in a safe place.
Fit the cover around the head 2
restraint.
Be careful not to damage the *
energy-absorbing foam.
Fit the bottom of the cover over the
3
lower part of the child seat shell.
Pull the harness straps through the
4
appropriate holes in the cover.
Fit the elastic around the cup
5
holders on the bottom of the child
seat shell.
Move the head restraint to the
6
lowest position. Ensure that harness
slots in cover, head restraint and
harness adjuster are aligned and
route the harness straps through the
harness slots and harness adjuster.
To Next Page
Loading...
