21
When positioning this child •
seat in booster mode use
the vehicle’s lap-shoulder
belt to secure the child and
child seat into the desired
seating position.
In booster mode, this child •
seat can be positioned
on the vehicle seat using
LATCH. Use the vehicle’s
lap-shoulder belt to secure
the child. Ensure that the LATCH system does not interfere with the vehicle belt
function and alignment when securing your child.
This child seat can be used in harness mode with children at least 2 years of •
age and 25 – 80 lbs (11.3 – 36.3 kg) who stand 30 – 53 in. (76.2 – 134.6 cm) in
height. Britax recommends using harness mode to 80 lbs (36.3 kg). See the Child
Size: Height and Weight Limitations section on page 4 for information on when
your child has outgrown harness mode.
Booster Mode
The recline block must be •
rotated to the back when
positioning the child seat in
booster mode.
This child seat can be used in •
booster mode with children
who stand 42 – 60 in. (106.7
– 152.4 cm) in height and
weigh more than 40 lbs (18.1
kg). Britax recommends
using harness mode to 80 lbs (36.3 kg). See the Child Size: Height and Weight
Limitations section on page 4 for information on when your child has outgrown
harness mode.
Recline
block
WARNING:
Use only the vehicle’s lap and shoulder belt system when restraining
a child in booster mode. Never restrain a child with a lap belt only in booster mode.
Booster Mode
General Information
To Next Page
Loading...
