33
Securing Your Child
1 Loosen the harness.
a Lift harness adjuster lever
b Pull both harness straps forward
2 Open the chest clip.
a Press tabs
b Pull apart
3 Release the buckle and attach
the harness straps to the harness
holders.
4 Place the child in the child seat.
* Ensure the child is positioned
upright in the child seat and not
slouching. Their bottom must
touch the child seat, and their back
must rest flat against the back of
the child seat.
5 Position the harness straps
around the child.
6 Fasten the harness buckle.
* Proper connection is confirmed
with a click after inserting each
buckle tongue.
7 Check for proper harness height,
and pull any excess slack up to
the child’s shoulder area before
tightening.
8 Pull the harness adjuster strap up
and away from the child seat to
tighten the harness.
* The harness should have a
comfortable but snug fit around
the child. A snug strap should not
allow any slack. It lies in a relatively
straight line without sagging. It
does not press on the child’s flesh
or push the child’s body into an
unnatural position. You should not
be able to pinch excess.
9 Fasten the chest clip.
* The correct height for the chest clip
is at the middle of the chest at
armpit level.
To Next Page
Loading...
