36
Care and Maintenance
3 Pull the buckle through the
slot in the cover.
* Ensure that the buckle is
through the correct cover slot
for the buckle position.
2
Attach the plastic hooks to the
bottom edge of the child seat.
4 Feed each harness strap
through the desired harness
slots in the cover and shell to
the back of the child seat.
5 Nest the harness straps by
inserting the right strap loop
into the left strap loop.
6 Before reattaching the harness
straps to the yoke, hold the
harness yoke as shown, and
ensure that the adjuster strap
attached to the yoke is not
twisted.
Replacing the Cover
1 Fit the child seat cover around
the child seat shell.
To Next Page
Loading...
