BroadLink RM-PRO User Manual

WIFI UNIVERSAL REMOTE (Model: RM-PRO)
6 | P a g e
FAQ
Question:
WIFI light on the device is flashing
Answer:
 The WIFI light is flashing quickly
If the WIFI light is flashing quickly, it means that the BroadLink device is in the original factory state
It is ready for you to start configuring it
 The WIFI light is flashing slowly
If the WIFI light flashes slowly for 4 flashes and then stops flashing for 1 second, and then repeats this
cycle, it means the BroadLink device is waiting for you to configure it. Please press at the upper right
icon to start the configuration
 The WIFI light is flashing very slowly
If the WIFI light is flashing 1 time every 3 seconds indicates that the device has not connected to the
WIFI. Check your WIFI is running
 The WIFI light is flashing slowly and continuously
If the WIFI light keeps on flashing continuously at 1 flash per seconds, it means the configuration has
failed, please reset the device and configure again

BroadLink RM-PRO Specifications

General

Device Type	Universal Remote Control
Brand	BroadLink
Model	RM-PRO
Supported Protocols	IR, RF
IR Frequency	38 kHz
RF Frequency	433 MHz, 315 MHz
App Control	Yes
Learning Function	Yes
Operating Humidity	≤85% RH
Connectivity	Wi-Fi
Voice Control	Yes (via Alexa, Google Assistant)
Power Source	USB
Operating Temperature	0°C to 50°C
Dimensions	110 x 110 x 36 mm
Power Supply	5V DC