Now, turn off your TV using its physical remote control and follow the instructions to start
calibrating the physical remote to the
ihc
App.
During the calibration, the
Universal Remote
will
send several control commands to the appliance and all you have to do is confirm the results.
When the calibration is done, the
ihc
App will show a remote control panel with buttons mapped
from the physical remote.
If the
ihc
App learns a button incorrectly during calibration, tap
on the top right corner. Select
Learn from the drop-down menu to re-learn a button. For example, if VOL+ has been incorrectly
learned, tap Learn again on the right of the button of VOL+, the indicator LED will turn orange.
Press VOL+ on the physical remote towards the
Universal Remote
. The orange indicator LED
will go off, which means the button has been re-learned successfully.
To Next Page
Loading...
