BroadLink RM-PRO User Manual

7
Check the Wi-Fi name and input its password. Tap Next so that the Universal Remote will be
added as a device. The process may take 20-60 seconds, depending on network conditions.
Once the configuration is completed, the blue Wi-Fi LED will flash slowly then turn off, choose a
room for the device and tap Done.
Note:
1. Please keep the device and your phone in good Wi-Fi signal range.
2. A reset can resolve most issues: Reset your Universal Remote by inserting a needle into
the designated reset button keyhole, press and hold, for at least 6 seconds until
the blue Wi-Fi LED flashes rapidly, then repeat the configuration process.
If you fail to configure the Universal Remote using the above method, please tap Try other
methods and follow the in-App wizard to enter AP mode configuration: Insert a needle into the

BroadLink RM-PRO Specifications

General

Device Type	Universal Remote Control
Brand	BroadLink
Model	RM-PRO
Supported Protocols	IR, RF
IR Frequency	38 kHz
RF Frequency	433 MHz, 315 MHz
App Control	Yes
Learning Function	Yes
Operating Humidity	≤85% RH
Connectivity	Wi-Fi
Voice Control	Yes (via Alexa, Google Assistant)
Power Source	USB
Operating Temperature	0°C to 50°C
Dimensions	110 x 110 x 36 mm
Power Supply	5V DC