BroadLink RM-PRO - Wi-Fi AP Mode Configuration; Connecting via Devices Wi-Fi Hotspot

8
designated reset button keyhole, press and hold the reset button for at least 6 seconds until the
LED indicator flashes rapidly. Repeat this and hold the reset button until the blue LED indicator
flashes slowly at intervals. This indicates that the Universal Remote has entered Wi-Fi AP mode.
Now, connect the Wi-Fi of your Android or iOS device to the Universal Remote ’s AP (Wi-Fi name
BroadLinkProv). After connecting, switch back to your home Wi-Fi. Universal Remote will enter
AP mode configuration. It will take around 20-60 seconds, depending on network conditions.
Once configuration is completed, the blue Wi-Fi LED will flash slowly then turn off, choose a
room for the device and tap Done.