Need help?Do you have a question about the Broan BCDJ1 and is the answer not in the manual?
Covers fire, shock, and injury risks with essential precautions.
Provides detailed guidance on preventing and handling range top grease fires.
Manages fan speed, activation, and filter cleaning alerts via the control panel.
Automatic blower activation based on detected high heat levels for safety.
Includes timed blower shut-off and adjustable light intensity settings.
Single button to activate or deactivate both blower and lighting simultaneously.
Instructions for motor lubrication and cleaning fan wheels for optimal performance.
Procedures for cleaning grease filters and replacing non-ducted filters.
Methods for cleaning stainless steel and painted finishes, including what to avoid.
List of tools and accessories needed for the installation process.
Steps and considerations for installing ductwork in ducted installations.
Instructions for removing protective film, duct plates, and grease filters.
Steps to remove the right cover plate and its retaining screws.
Removing parts bags, EZ1 brackets, and electrical power cable knockouts.
Specific steps for preparing the hood for non-ducted configurations.
Choosing and removing the correct knockout plates for duct connection.
Installing the damper assembly or 7-inch round duct plate.
Preparing cabinets for the EZ1 system, including template use and marking.
Creating openings for wiring and ductwork, and marking bracket positions.
Securing the EZ1 brackets to the side frames of framed cabinets.
Locating and drilling holes for bracket attachment on frameless cabinets.
Securing the EZ1 brackets to the bottom of frameless cabinets.
Connecting power cable and temporarily hanging the hood on rear brackets.
Securing the hood on front brackets and connecting ductwork if applicable.
Fastening the hood to EZ1 brackets using metal screws in framed cabinets.
Fastening the hood to cabinet using wood screws in frameless cabinets.
Using diagrams to determine ductwork and electrical cutout locations.
Installing half of the rear mounting screws for standard hood installation.
Mounting the hood on rear screws and securing it to the cabinet.
Connecting ductwork to the hood for proper ventilation.
Connecting the house power cable to the range hood's internal wiring.
Reinstalling grease filters or attaching non-ducted filters per type.
Visual guide showing numbered parts for the first generation model.
Detailed list of part numbers and quantities for 30-inch units.
Visual guide showing numbered parts for the second generation model.
Detailed list of part numbers and quantities for 30-inch second-generation units.
Visual identification of parts specific to the BCDJ1 series.
Table of part numbers and quantities for 36 and 42-inch models.
Visual identification of parts for BCDJ1 series, second generation.
Table of parts for 36/42-inch second-generation BCDJ1 units.
General| Brand | Broan |
|---|---|
| Model | BCDJ1 |
| Category | Ventilation Hood |
| Language | English |
To Next Page