Brocade Communications Systems 8 - Page 290

258 Fabric OS Command Reference
53-1001764-02
FCoE
2
To display FIP and FCMAP configurations on the Brocade 8000:
switch:admin> fcoe --fipcfgshow
FIP Unsolicited Advertisement Interval = 0
========================================
VLAN fcmap
========================================
5 0xefc00 [Default fcmap]
========================================
To display devices logged into FCoE port 2/0on the Brocade FCoE10-24:
switch:admin> fcoe --loginshow 2/0
Number of connected devices: 1
================================================================
Peer Type Connect Info Device WWN Device MAC
================================================================
FCOE_DEVICE Direct 10:00:00:05:1e:8f:fb:12 00:05:1e:8f:fb:12
==========================================================
Session MAC FCoE Port MAC Te port
==========================================================
0e:fc:00:91:40:01 00:05:1e:7b:34:e0 Te 2/0
To display the configuration for FCoE port 2/0 on the Brocade FCoE10-24:
switch:admin> fcoe --cfgshow 2/0
Slot: 2, Port: 0, Status: Enabled, Port WWN: 20:40:00:05:1e:92:de:00,
DeviceCount: 1, Type: VF-Port, MAC: 00:05:1e:7b:34:e0
VF_ID: 128, Fabric Name: 10:00:00:05:1e:35:bb:32
See Also fcoeLoginGroup, fcoeLoginCfg