Brocade Communications Systems 8 - Portlogreset

720 Fabric OS Command Reference
53-1001764-02
portLogReset
2
portLogReset
Enables the port log facility.
Synopsis portlogreset
Description Use this command to enable the port log facility.
Notes Refer to portLogClear for events that may disable the port log facility.
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.
Operands none
Examples To enable the port log:
switch:admin> portlogreset
See Also none