876 Fabric OS Command Reference
53-1001764-02
slotPowerOn
2
slotPowerOn
Restores power to a slot.
Synopsis slotpoweron slot
Description Use this command to turn on the power to a blade unit. The slot must have a valid blade unit
present and the blade unit must be currently powered off. The slotShow command reports such
slots as being in the state of INSERTED, NOT POWERED ON.
Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.
Operands This command has the following operand:
slot Specify the slot number of the blade to be powered on. This operand is
required.
Examples To power on blade unit 3:
switch:admin> slotpoweron 3
Powering on slot 3.
See Also slotPowerOff, slotShow
To Next Page
Loading...
