Fabric OS Command Reference 281
53-1001764-02
fcrEdgeshow
2
fcrEdgeshow
Displays the FIDs of all configured EX_Ports.
Synopsis fcredgeshow
fcredgeshow [-fid FabricID]
fcredgeshow --help
Description Use this command without operand to display information about all Fabric IDs (FIDs) that have
been created on the chassis and are assigned to EX_Ports.
When a FID is specified, fcredgeshow displays information for all EX_Ports configured with the
specified FID.
For each FID, the command output includes the following:
FID Fabric ID of the EX_Port.
EX-port EX_Port number of the switch.
E_Port Port number for the remote E_Port.
PWWN Neighbor switch port WWN.
SWWN Neighbor switch WWN.
The command output depends on the EX_Port configuration:
• If the EX_Port is Online, the command displays the FID, the EX_Port to which it is assigned, the
E_Port, the port WWN and the switch WWN.
• If the EX_Port is offline, the command displays the FID, the EX_Port to which it is assigned, and
an "OFFLINE" message.
• IF no EX_Ports are configured in the switch, the command displays "No EX-port Configured".
• If no EX_Ports are configured with the specified FID, the command displays the following
message: "No EX-ports with FID FabricID"
Operands This command has the following operands:
-fid FabricID Specifies the FID for which to display the configured EX_Ports.
--help Displays the command usage.
Examples To display the EX_Ports configured in the switch:
switch:admin> fcredgeshow
FID EX-port E-port Neighbor Switch (PWWN, SWWN )
-------------------------------------------------------------------------
25 11 244 20:f4:00:05:1e:38:a4:cb 10:00:00:05:1e:38:a4:cb
35 10 299 2e:2b:00:05:1e:40:44:02 10:00:00:05:1e:40:44:02
To display the EX_Ports configured with a specified FID:
switch:admin> fcredgeshow -fid 25
FID EX-port E-port Neighbor Switch (PWWN, SWWN )
-------------------------------------------------------------------------
25 11 244 20:f4:00:05:1e:38:a4:cb 10:00:00:05:1e:38:a4:cb
To Next Page
Loading...
