Brocade Communications Systems 8 - Page 484

452 Fabric OS Command Reference
53-1001764-02
iscsiCfg
2
--show dd [-d dd_name] [-h]
Displays the DD database; dd_name is optional.
ddset Discovery Domain Set parameters. Actions on ddset are:
--create ddset -n ddset_name -d dd_list [-h]
Creates a DD set entry with the specified ddset_name and dd_list. The DDs in
dd_list must already exist.
--add ddset -n ddset_name -d dd_list [-h]
Adds a new DD to an existing DD set.
--delete ddset -n ddset_name [-d dd_list] [-h]
Deletes the DD set with ddset_name. If dd_list is specified, only those DDs
are deleted; otherwise, the entire DD set is deleted.
--enable ddset -n ddset_name [-h]
Activates the DD set specified.
--disable ddset [-n ddset_name] [-h]
Disables an active DD set.
--show ddset [-n ddset_name] [-v] [-h]
Displays the DD set database. ddset_name is optional.
fabric iSCSI-enabled switches and their operational states. The action is --show.
--show fabric[-h]
Displays the database iSNS client status of all iSCSI switches in the fabric. An
asterisk (*) next to the switch ID denotes the local switch.
initiator iSCSI Initiator database. Actions on initiator are:
--clear initiator [-h]
Clears the iSCSI initiator database.
--show initiator [-i initiator_name][-h]
Displays all iSCSI initiators that the switch is aware of. If an initiator has
attempted discovery or logon to a target, it is displayed here. If initiator_name
is specified, this command returns a list of all online iSCSI targets accessible
by initiator_name.
transaction Transaction database. Actions on transaction include:
--abort transaction -x transaction_id [-h]
Aborts the database transaction in progress with ID transaction_id.
--show transaction [-h]
Displays information about a transaction or the entire transaction database.
all Applies to all databases. Actions include:
--clear all [-h]
Deletes auth, ddset, dd and target databases. The modifications made to the
databases are not saved to nonvolatile memory until a --commit all is
issued.