Fabric OS Command Reference 609
53-1001764-02
portBufferShow
2
Operands When invoked without operands, this command displays the long distance buffer information for all
the port groups of the switch.
The following operands are optional:
slot For bladed systems only, specifies the slot number of the port group to
display, followed by a slash (/).
port Specifies the number of a port associated with the port group, relative to its
slot for bladed systems. Use switchShow for a list of valid ports.
Examples To display the port buffer information for a port:
switch:admin> portbuffershow 17
User Port Lx Max/Resv Buffer Needed Link Remaining
Port Type Mode Buffers Usage Buffers Distance Buffers
---- ---- ---- ------- ------ ------- ---------- ---------
16 - - 0 - -
17 E L1 - 54 54 50km
18 - - 0 - -
19 - - 0 - - 54
See Also portCfgLongDistance
To Next Page
Loading...
