Brocade Communications Systems 8 - Page 643

Fabric OS Command Reference 611
53-1001764-02
portCamShow
2
Examples To display the filter CAM utilization for a single port on a switch:
switch:user> portcamshow 3/2
--------------------------------------------------
Area SID used DID used SID entries DID entries
34 3 1 350400 2b2200
2b1200
220400
--------------------------------------------------
SID Free, DID Free: (61, 511)
To display port CAM entries on shared ports (In the following example, port 7/31 and 7/39 are
shared ports and 7/31 is the primary port):
switch:user> portcamshow 7/39
--------------------------------------------------
Area SID used DID used SID entries DID entries
207 3 1 03b380 03cf80
034100
03cf00
--------------------------------------------------
SID free, DID free: (2044, 1020)
switch:admin> portcamshow 7/31
--------------------------------------------------
Area SID used DID used SID entries DID entries
207 4 2 03b380 03cf80
034100 03cf00
03cf00
03cf80
--------------------------------------------------
SID free, DID free: (2044, 1020)
The SID entry 03cf00 and DID entry 03cf80 on port 7/31 belong to port 7/39.
See Also switchShow