Brocade Communications Systems 8 - Page 722

690 Fabric OS Command Reference
53-1001764-02
portCfgVEXPort
2
Examples To display the VEX_Port configuration of port 2/16:
switch:admin> portcfgvexport 2/16
Port 2/16 info
Admin: enabled
State: OK
Pid format: core(N)
Edge Fabric ID: 16
Front Domain ID: 160
Front WWN: 50:06:06:9e:20:9f:ce:10
Principal Switch: 7
principal WWN: 10:00:00:60:69:c0:05:8a
Fabric Parameters: Auto Negotiate
R_A_TOV: 9000(N)
E_D_TOV: 2000(N)
Edge fabric's primary wwn: N/A
Edge fabric's version stamp: N/A
To set the fabric ID of port 2/21 to 5 and the port ID format to core:
switch:admin> portcfgvexport 2/21 -f 5 -p 1
To configure port 2/20 as a VEX_Port and set the fabric ID to 4:
switch:admin> portcfgvexport 2/20 -a 1 -f 4
To disable fabric parameter negotiation on port 2/20 of a VEX_Port:
switch:admin> portcfgvexport 2/20 -t 2
See Also portCfgEXPort, portDisable, portEnable, portShow