Brocade Communications Systems 8 - Page 735

Fabric OS Command Reference 703
53-1001764-02
portEnable
2
Examples To enable a single port:
switch:admin> portenable 2/4
To enable a range of ports:
switch:admin> portenable 2/4-8
To enable multiple port ranges:
switch:admin> portenable 2/24-26 3/10-12 4/3-4
To enable a port by specifying its index number:
switch:admin> portenable -i 176
portenable: portSwap feature enabled.
To enable a range of ports by specifying the corresponding port index range:
switch:admin> portenable -i 170-176
portenable: portSwap feature enabled.
To enable multiple ports by specifying multiple port index ranges:
switch:admin> portenable -i 30-36 170-176
portenable: portSwap feature enabled.
To enable all ports on slot 3-5.
switch:admin> portenable -s 3-5
See Also portCfgPersistentDisable, portCfgPersistentEnable, portDisable, portShow, portSwapDisable,
portSwapShow, switchShow