834 Fabric OS Command Reference
53-1001764-02
secCertUtil
2
Enter Login Name: mylogin
Enter Password: password
Success: imported certificate [ldap.cert].
To import an LDAP certificate from a remote host to the local switch in noninteractive mode:
switch:admin> seccertutil import -ldapcacert -protocol ftp -ipaddr 195.168.38.206 \
-remotedir /users/home/remote_certs -certname ldap.cer -login abcd -passwd passwd
Success: imported certificate [ldap.cert].
To import an FCAP switch certificate in interactive mode:
switch:admin> seccertutil import -fcapswcert
Select protocol [ftp or scp]: scp
Enter IP address: 10.32.2.25
Enter remote directory: /users/myname/OPENSSL
Enter certificate name (must have ".crt" or
".cer" ".pem" or ".psk" suffix):01.pem
Enter Login Name: myname
myname@10.32.2.25's password:
Success: imported certificate [01.pem].
To import an FCAP CA certificate in interactive mode:
switch:admin> seccertutil import -fcapcacert
Select protocol [ftp or scp]: scp
Enter IP address: 10.32.2.25
Enter remote directory: /users/myname/OPENSSL
Enter certificate name (must have ".crt" or
".cer" ".pem" or ".psk" suffix):CACert.pem
Enter Login Name: myname
myname@10.32.2.25's password:
Success: imported certificate [CACert.pem].
To import a PKI-based certificate with configure and enable option in interactive mode:
switch:admin> seccertutil import -config swcert -enable https
Select protocol [ftp or scp]: ftp
Enter IP address: 192.168.38.206
Enter remote directory: /users/home/mycerts
Enter certificate name (must have ".crt", ".cer" or ".pem" suffix): filename
Enter Login Name: username
Enter Password: password
Success: imported certificate [filename].
Certificate file in configuration has been updated.
Secure http has been enabled.
To import a PKI-based certificate with configure and enable option in noninteractive mode:
switch:admin> seccertutil import -config swcert -enable https -protocol ftp \
-ipaddr 195.168.38.206 -remotedir /users/home/remote_certs -certname file.crt \
-login abcd -password passwd
Success: imported certificate [file.crt].
Certificate file in configuration has been updated.
Secure http has been enabled.
To Next Page
