Brocade Communications Systems 8 - Page 971

Fabric OS Command Reference 939
53-1001764-02
switchStatusPolicySet
2
Temperatures 2 1
Fans 2 1
WWN 0 1
CP 0 1
Blade 0 1
CoreBlade 1 1
Flash 0 1
MarginalPorts 2 1
FaultyPorts 2 1
MissingSFPs 0 0
Note that the value, 0, for a parameter, means that it is
NOT used in the calculation.
** In addition, if the range of settable values in the prompt is (0..0),
** the policy parameter is NOT applicable to the switch.
** Simply hit the Return key.
The minimum number of
Bad PowerSupplies contributing to DOWN status: (0..4) [3] 2
Bad PowerSupplies contributing to MARGINAL status: (0..4) [0] 1
Bad Temperatures contributing to DOWN status: (0..28) [2]
Bad Temperatures contributing to MARGINAL status: (0..28) [1]
Bad Fans contributing to DOWN status: (0..3) [2]
Bad Fans contributing to MARGINAL status: (0..3) [1]
Down WWN contributing to DOWN status: (0..2) [0]
Down WWN contributing to MARGINAL status: (0..2) [1]
Down CP contributing to DOWN status: (0..2) [0]
Down CP contributing to MARGINAL status: (0..2) [1]
Down Blade contributing to DOWN status: (0..8) [0]
Down Blade contributing to MARGINAL status: (0..8) [1]
Down CoreBlade contributing to DOWN status: (0..2) [0] 1
Down CoreBlade contributing to MARGINAL status: (0..2) [1]
Out of range Flash contributing to DOWN status: (0..1) [0]
Out of range Flash contributing to MARGINAL status: (0..1) [1]
MarginalPorts contributing to DOWN status: (0..448) [2]
MarginalPorts contributing to MARGINAL status: (0..448) [1]
FaultyPorts contributing to DOWN status: (0..448) [2]
FaultyPorts contributing to MARGINAL status: (0..448) [1]
MissingSFPs contributing to DOWN status: (0..448) [0]
MissingSFPs contributing to MARGINAL status: (0..448) [0]
Policy parameter set has been changed
See Also switchStatusPolicyShow, switchStatusShow