Appendix A: Changes Between Releases
● Changes between FastIron 07.4.00 or 07.5.00 and FastIron 08.0.xx............................. 37
Changes between FastIron 07.4.00 or 07.5.00 and FastIron 08.0.xx
FastIron 08.0.xx adds support and enhanced functionality for a variety of desired Layer 3 features.
Modifications in specific features have changed a large amount of CLI configuration commands, show
commands, and show command output. These changes are in large part due to VRF-light support in
these FastIron products: FSX 800, FSX 1600, ICX 6610, ICX 6650, and FCX.
For detailed information on commands, configurations, and feature behaviors, refer to the FastIron
08.0.xx configuration guides.
For more information on supported features and platforms, refer to FastIron 08.0.xx release notes.
New or modified parameter values
The following sections cover the changes in parameters for several protocols in FastIron 08.0.xx as
compared to FastIron 07.4.00.
NOTE
Only the parameters with changes to allowable values or ranges are listed.
Management parameter default values
Changes in management defaults TABLE 2
Parameter FastIron 08.0.xx FastIron 07.4.00
Maximum number of outbound Telnet sessions 5 1
Maximum number of outbound SSH sessions 5 1
Multicast parameter values
Changes in multicast parameter values TABLE 3
Parameter Device FastIron 08.0.xx (minimum/
maximum/default)
FastIron 07.4.00 (minimum/maximum/
default)
Layer 2 Multicast
IGMP Group ICX 6430 256/4096/1024 256/1024/256
FastIron Ethernet Switch Software Upgrade Guide 37
53-1003632-02
To Next Page
Loading...
Need help?
General
