Brocade Communications Systems FastIron X Series Software Update

show ip
ospf
interface
?
Brocade#sh ip ospf interface
e 2/3/1 admin down, oper down, ospf enabled, state down
IP Address 192.213.112.213, Area 0.0.0.200
Database Filter: Not Configured
State down, Pri 1, Cost 1, Options 2, Type broadcast Events 0
Timers(sec): Transmit 1, Retrans 5, Hello 10, Dead 40
DR: Router ID 0.0.0.0 Interface Address 0.0.0.0
BDR: Router ID 0.0.0.0 Interface Address 0.0.0.0
Packets Received Packets Sent
Hello 0 0
Database 0 0
LSA Req 0 0
LSA Upd 0 4
LSA Ack 0 0
No Packet Errors!
Neighbor Count = 0, Adjacent Neighbor Count= 0
Authentication-Key: None
MD5 Authentication: Key None, Key-Id None, Auth-change-wait-time
300
e 4/3/1 admin up, oper up, ospf enabled, state up
IP Address 193.213.111.213, Area 0.0.0.200
Database Filter: Not Configured
State DR, Pri 1, Cost 1, Options 2, Type broadcast Events 3
Timers(sec): Transmit 1, Retrans 5, Hello 10, Dead 40
DR: Router ID 192.168.98.213 Interface Address 193.213.111.213
BDR: Router ID 192.168.98.111 Interface Address 193.213.111.111
Packets Received Packets Sent
Hello 525 524
Database 4 3
LSA Req 0 1
LSA Upd 106 24
LSA Ack 17 52
No Packet Errors!
Neighbor Count = 1, Adjacent Neighbor Count= 1
Neighbor: 193.213.111.111 [id 192.168.98.111] (BDR)
Authentication-Key: None
MD5 Authentication: Key None, Key-Id None, Auth-change-wait-time
300
The output display
includes the "
DataBase Filter"
and Packet Count
table.
show ip
ospf
interface
1.2.3.4
Brocade#sh ip ospf interface 192.213.111.213
ve 17 admin up, oper up, ospf enabled, state up
IP Address 192.213.111.213, Area 0.0.0.200
Database Filter: Not Configured
State DR, Pri 1, Cost 1, Options 2, Type broadcast Events 2
Timers(sec): Transmit 1, Retrans 5, Hello 10, Dead 40
DR: Router ID 192.168.98.213 Interface Address 192.213.111.213
BDR: Router ID 192.168.98.111 Interface Address 192.213.111.111
Packets Received Packets Sent
Hello 536 538
Database 3 3
LSA Req 0 1
LSA Upd 108 27
LSA Ack 24 104
No Packet Errors!
Neighbor Count = 1, Adjacent Neighbor Count= 1
Neighbor: 192.213.111.111 [id 192.168.98.111] (BDR)
Authentication-Key: None
MD5 Authentication: Key None, Key-Id None, Auth-change-wait-time
300
The output display
includes the "
DataBase Filter"
and Packet Count
table.
show command output differences between 07.4.00 and 08.0.xx
FastIron Ethernet Switch Software Upgrade Guide
53-1003632-02

Brocade Communications Systems FastIron X Series Specifications

General

Brand	Brocade Communications Systems
Model	FastIron X Series
Category	Switch
Language	English