Brocade Communications Systems FastIron X Series Software Update

show ipv6
vrrp stat
Brocade#sh ipv6 vrrp stat
Interface ethernet 1/1/12
rxed vrrp header error count = 0
rxed vrrp auth error count = 0
rxed vrrp auth passwd mismatch error count = 0
rxed vrrp vrid not found error count = 0
VRID 200
rxed arp packet drop count = 0
rxed ip packet drop count = 0
rxed vrrp port mismatch count = 0
rxed vrrp ip address mismatch count = 0
rxed vrrp hello interval mismatch count = 0
rxed vrrp priority zero from master count = 0
rxed vrrp higher priority count = 0
transitioned to master state count = 0
transitioned to backup state count = 1
total number of vrrp packets received = 1802
backup advertisements received = 0
total number of vrrp packets sent = 0
backup advertisements sent = 31
Interface ethernet v100
rxed vrrp header error count = 0
rxed vrrp auth error count = 0
rxed vrrp auth passwd mismatch error count = 0
rxed vrrp vrid not found error count = 0
VRID 100
rxed arp packet drop count = 0
rxed ip packet drop count = 0
rxed vrrp port mismatch count = 0
rxed vrrp ip address mismatch count = 0
rxed vrrp hello interval mismatch count = 0
rxed vrrp priority zero from master count = 0
rxed vrrp higher priority count = 0
transitioned to master state count = 0
transitioned to backup state count = 1
total number of vrrp packets received = 1801
backup advertisements received = 0
total number of vrrp packets sent = 0
backup advertisements sent = 31
The "show ipv6
vrrp statistics "
command output
display includes
the Hello TX
statistics packet
counts.
show ipv6
vrrp stat
ethernet
1/1
Brocade#sh ipv6 vrrp stat ethernet 1/1/12
Interface ethernet 1/1/12
rxed vrrp header error count = 0
rxed vrrp auth error count = 0
rxed vrrp auth passwd mismatch error count = 0
rxed vrrp vrid not found error count = 0
VRID 200
rxed arp packet drop count = 0
rxed ip packet drop count = 0
rxed vrrp port mismatch count = 0
rxed vrrp ip address mismatch count = 0
rxed vrrp hello interval mismatch count = 0
rxed vrrp priority zero from master count = 0
rxed vrrp higher priority count = 0
transitioned to master state count = 0
transitioned to backup state count = 1
total number of vrrp packets received = 1864
backup advertisements received = 0
total number of vrrp packets sent = 0
backup advertisements sent = 32
The "show ipv6
vrrp statistics
[ethernet
<slackid> |
<slotnum> |
<portnum>] "
command output
display includes
the Hello TX
statistics packet
counts.
show command output differences between 07.4.00 and 08.0.xx
FastIron Ethernet Switch Software Upgrade Guide
53-1003632-02

Brocade Communications Systems FastIron X Series Specifications

General

Brand	Brocade Communications Systems
Model	FastIron X Series
Category	Switch
Language	English