2. Installation
User Manual Unpacking and Moving Instructions
Unpacking the P-102
1. Upon receiving the crate, inspect the indicators for disturbance. Also, visually verify each crate is
not damaged. Inform the freight carrier and Polycold Technical Support of any inspection
discrepancy.
2. Remove the cover of each shipping crate. Inspect, and verify the contents against the shipping
documents. Do not remove any protective wrapping.
NOTE: Save all shipping materials for possible future use if the P-102 is returned to Brooks
Automation, Inc./Polycold Systems or shipped to another location. If the original crates have become
lost or damaged, contact Polycold Systems for replacements. Refer to "Material Safety Sheets" on
page I.
3. Move the product to its final location.
CAUTION
Heavy Object Hazard
The Product weighs 82 kg (180 lb).Failure to take the proper
precautions before moving it could result in personal injury.
4. Remove the bag from the Product and carefully inspect the product for signs of damage that may
have occurred during shipping.
RECYCLE
Recycle all packaging materials.
CAUTION
Safety glasses and gloves are to be worn at all times when
installing the product.
5. Inspect all vacuum sealing surfaces where the cold probe or cryobaffle is to be used. The surfaces
must be clean and free from scratches or other imperfections that might result in vacuum leaks.
Protect these surfaces at all times.
6. Remove any contaminants by wiping them with a clean cloth moistened with alcohol.
Accelerating Innovation 2-18
To Next Page
Loading...