29
Press to access the Settings menu When finished, press to exit
Set Clock Set the system time for the unit Press and
buttons on the remote, or the OK button on the
scanner, to switch between the HOUR, MINUTE and
12/24 fields Press
and to change the number
When the correct time is showing, press to confirm
IMPORTANT: The clock will only maintain the correct
time and date when powered on
Set Alarm Set the time for the alarm to be activated in the same
way as Set Clock above You can set the alarm to be
activated once, daily or off When the alarm goes off,
press any button on the remote to deactivate
Alarm Ringtone Set your preference alarm ringtone
Wave option: Built-in ringtone in the internal memory
Music option: The very last updated music file
from the selected device will be set as the default
alarm ringtone
To Next Page
Loading...
