Brookstone iConvert - Printing Photos; Connecting for Printing; Printing a Single Photo

32

Press POWER button to turn on the unit
Press
to bring up the System Setup menu under MAIN MENU
Press or to select USB Link To, then press or 
Press or to select Printer, then press 
Use the mini-USB cable (included) and connect it to the back of the unit
and the other end to a PictBridge
TM
compatible printer

• The print function only works with printers that are PictBridge
™
compatible
• Be sure the USB Link To is setup to Printer selection, otherwise the print
function will be invalid

Select a photo and display it in Photo Browse mode (pages 20-21)
Press to bring up the Settings menu
Use the / / / buttons, select Print, then press 
Select Yes and press
to print The photo will then be printed from
your printer Select No to go back


1
2
3
4
1
2
3
4