Preparation Before Use
7. Sitting on the uAstro
• The rollers are usually stored in the upper part of the backrest. This position is
known as the “storage position”.
• If the rollers are not in the storage position, simply reset by pressing the power
button on the controller before sitting on the uAstro.
Moving Method (2):
• Raise the backrest and retract the leg rest fully.
• Turn the main power switch OFF and unplug the power plug from the
electrical outlet.
• Carry the chair by holding the upper part of the backrest and the corners
of the side panel.
Caution
• Do not move the uAstro when there is someone sitting on it. This will cause
the uAstro to tip over, resulting in accident and injuries.
Caution
• Do not sit down on the chair with the leg rest raised. Any sudden heavy weight
on the leg rest could cause damage to the mechanism, or may result in accident
or injury if the chair tips over.
• Ensure that the backrest returns to its most upright position before sitting down
on the chair, then recline it according to your preference.
To Next Page
Loading...
