Troubleshooting and routine maintenance
149
C
d Pull down the two green levers, one on
the left-hand-side and one on the
right-hand-side, as shown in the
illustration below, and then fold down
the fuser cover (1).
HOT SURFACE
After you have just used the machine, some
internal parts of the machine will be
extremely hot. When you open the front or
back cover of the machine, DO NOT touch
the shaded parts shown in the illustration.
e Using both hands, gently pull the
jammed paper out of the fuser unit.
f Close the fuser cover (1) and lift the two
green levers at the left and right hand
sides.
g Close the back cover.
1
1
To Next Page
Loading...
