General setup
27
3
LCD contrast 3
You can change the contrast to make the
LCD look lighter or darker.
a Press Menu, 1, 8.
18.LCD Contrast
-nnonn+
Select dc&OK
b Press c to make the LCD darker. Or,
press d to make the LCD lighter.
Press OK.
c Press Stop/Exit.
Dial Prefix 3
The dial prefix setting will automatically dial a
predefined number before every fax number
you dial. For example: If your telephone
system requires a 9 to dial an outside number
use this setting to automatically dial 9 for
every fax you send.
a (USA) Press Menu, 0, 5.
(Canada) Press Menu, 0, 6.
b Press a or b to choose On or Off.
Press OK.
If you chose On, go to c.
If you chose Off, go to e.
c Press 1 or 2 to choose 1.Change or
2.Exit.
If you chose 1.Change, go to d.
If you chose 2.Exit, go to e.
d Enter the prefix number (up to 5 digits)
on the dial pad.
Press OK.
Note
• You can use the numbers 0 to 9, #, l and
!. (Press Hook to display “!”.)
You cannot use ! with any other numbers
or characters.
• (Canada only) If the pulse dialing mode is
on, # and l are not available to use.
e Press Stop/Exit.
To Next Page
Loading...
