Brother 9840CDW - Color Laser - All-in-One - Checking the Remaining Life of Parts

Troubleshooting and routine maintenance
203
C
Checking the remaining life of
parts C
You can view the remaining life of these parts
on the LCD.
a Press Menu, 8, 3.
83.Parts Life
1.Drum
2.Belt Unit
3.PF Kit MP
Select ab or OK
b Press a or b to choose 1.Drum,
2.Belt Unit, 3.PF Kit MP,
4.PF Kit 1, 5.PF Kit 2
1
,
6.Fuser or 7.Laser.
Press OK.
83.Parts Life
1.Drum
Remaining: XX%
1
PF Kit 2 appears only when the optional
LT-100CL tray is installed.
c Press Stop/Exit.
Note
The life check of a part will be accurate
only if that part’s life counter was reset
when the new part was installed. It will not
be accurate if that part’s life counter was
reset during the life of the used part.