Brother 9840CDW - Color Laser - All-in-One - Page 167

Troubleshooting and routine maintenance
151
C
c If the paper is not caught in the paper
tray, open the back cover.
d Push the gray lever on the left hand
side (1) to the right.
HOT SURFACE
After you have just used the machine, some
internal parts of the machine will be
extremely hot. When you open the front or
back cover of the machine, DO NOT touch
the shaded parts shown in the illustration.
e Pull out the jammed paper slowly.
f Reset the gray lever on the left hand
side (1) back to the original position.
g Close the back cover.
h Put the paper tray firmly back in the
machine.
1
1