Brother AE1700 - Gathering; Darning

34
——————
—————————————————————————————————————————————————————————————————————————————————————————
—
————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————
5
Gathering
1
Loosen the tension of the upper thread so
that the lower thread lies on the underside
of the material.
2
Sew a single row (or many rows) of
straight stitches.
3
Pull the lower threads to gather the
material.
Darning
1
Turn off the machine.
Place the darning plate on the needle
plate, then turn on the machine.
2
Either remove both the presser foot and
presser foot holder assembly and then
lower the presser foot lever.
3
Put the section you want to darn under
the presser foot together with fabric for
reinforcement.
4
Turn on the machine.
Stitch Name Pattern
Stitch Length
[mm (inch)]
Straight Stitch
(Center Needle
Position)
2.5 (3/32)
Straight Stitch
(Left Needle Position)
2.5 (3/32)
5
7
Stitch Name Pattern
Stitch
Length
[mm (inch)]
Other
Straight Stitch
(Center Needle
Position)
1.6 (1/16)
Darning
Plate
Straight Stitch
(Center Needle
Position)
1.8 (1/16)
Darning
Plate
Straight Stitch
(Center Needle
Position)
2 (1/16)
Darning
Plate
Straight Stitch
(Center Needle
Position)
2.5 (3/32)
Darning
Plate
Straight Stitch
(Center Needle
Position)
4 (3/16)
Darning
Plate
Straight Stitch
(Left Needle
Position)
2.5 (3/32)
Darning
Plate
2
3
4
5
6
7