To Next PageTo Next Page
Need help?Do you have a question about the Brother BE-0901E-AC and is the answer not in the manual?
General| Type | Embroidery Machine |
|---|---|
| Number of Needles | 1 |
| Automatic needle threader | Yes |
| LCD screen | Yes |
| Speed control | Yes |
| Included feet | Embroidery foot |
| Buttonhole styles | No sewing function |
| Needle positions | No sewing function |
| Drop feed | No sewing function |
| Free arm | No sewing function |
| Stitch width | No sewing function |
| Stitch length | No sewing function |
Choose the device to read data from: memory, floppy disk, computer, or network.
Select the reading mode: MANU (manual), AUTO (automatic), or F-AT (full automatic).
Set whether to automatically continue reading data after sewing completion.
Determine if initial edit data should be reflected in subsequent sewing operations.
Compatible formats for tape reader input are Tajima, Barudan, and ZSK.
Ensure transfer rates are synchronized between the tape reader and the embroidery machine.
Data read from the tape reader is stored in memory under the name "TapeData".
Inserts a pause signal automatically between identical needle numbers.
Prevents the automatic insertion of pause signals between needle numbers.
Details restrictions for needles in needle punch mode, including needle movement and thread trimming.
Set the range of needle numbers for which needle punch mode is to be applied.
