Brother BE-0901E-AC - Programming Instructions Manual

If your machine settings have not been programmed or if a “hard
reset” has been completed (necessitating reprogramming), these
instructions will walk you through programming the settings list.
PLEASE READ THESE INSTRUCTIONS
COMPLETELY BEFORE ATTEMPTING
ANY OF THESE PROGRAMMING STEPS.
To reset the machine to the default settings:
1. “Power off” the machine.
2. Press and hold the key on the panel.
3. “Power on" the machine. Release the
key after the machine completes the “boot-up”
process.
4. Press the key, when it is available on the
display
.
Let the machine complete the deletion process
before continuing.
For Technical Assistance Please Call Toll Free 1-877-4BROTHER
Email:
tsupport@brother.com
Website: http://www.brother-usa.com/industembroidery/tech_down.aspx
B
B
E
E
-
-
1
1
2
2
0
0
1
1
B
B
,
,
9
9
0
0
1
1
E
E
-
-
A
A
C
C
1